Rave Bag Aka Pa in a Back Pack [sRc]
Intro: Rave Bag Aka Pa in a Back Pack [sRc]
this is how to make a bag with a mini pa amp and 2 book shelf speakers in a back pack
STEP 1: Moding the Amp
if u dont have a amp that takes 12v or a battery powered amp then you will want to take the 240 volt step down out of the amp so it will run of 12v.
STEP 2: The Battery Used
www.maplins.co.uki used a yuasa 12v battery u can get these from www.maplins.co.uk i would recomend this battery as it has lasted nealy 3days so far with no change in volume on the amp
this battery is £21 but i got mine out of the house alarm for free (Y)
this battery is £21 but i got mine out of the house alarm for free (Y)
STEP 3: The Speakers
you can use book shelf speakers
i would recomend them as they have the wooden box and the sound is very good from them
i used some amstrad 30w speakers and tey work very well and go very loud
they do the job with amazing results
i would recomend them as they have the wooden box and the sound is very good from them
i used some amstrad 30w speakers and tey work very well and go very loud
they do the job with amazing results
STEP 4: The Audio Lead
u can use 2 types of leads for the input
1. a guitar lead with a plug in jack to convert it into a smaller conection for mp3 players
2. a phono aux lead for hifis with the small jack (headphone conection) on the other side
sorry i dont know what they are called lol
1. a guitar lead with a plug in jack to convert it into a smaller conection for mp3 players
2. a phono aux lead for hifis with the small jack (headphone conection) on the other side
sorry i dont know what they are called lol
STEP 5: Time 4 a Rave
enloy hope u like it :D x
13 Comments
JBessette 12 years ago
2. 1/8
tj the gnome 15 years ago
gav2142 14 years ago
gav2142 14 years ago
jongscx 15 years ago
tj the gnome 15 years ago
DjProToJeeX 16 years ago
Danny 16 years ago
gav2142 16 years ago
Danny 16 years ago
TheMadScientist 16 years ago
!Andrew_Modder! 16 years ago
gav2142 16 years ago